BLOG
News
→
Company News
Industry News
Frequently Asked Questions

23

2022-06

Ball spline manufacturer: Some common knowledge about linear guides

Ball spline manufacturers believe that linear guides play an irreplaceable role in machine tool motion, as they serve as the primary driving component, thus leaving ample room for further development of linear guides. The demands for high-speed machine tools and rapid acceleration/deceleration often lead to increased loads on ball screws. To meet these high-speed requirements, it is generally advisable to select ball screws with larger lead angles. However, choosing ball screws with larger lead angles can result in insufficient load-carrying capacity and stiffness.

2022-06-23

04

2022-07

Ball spline manufacturer: Some common knowledge about linear guides

Ball spline manufacturers consider linear guides to be one of the commonly used standard components in automated equipment. Linear guides are also known as slide rails, linear motion guides, or linear sliding rails. They are used for linear reciprocating motion and, under the same volume of moving parts, offer higher rated loads and greater precision in linear motion compared to linear bearings. At the same time, they can withstand certain torque loads, enabling high-precision linear motion even under heavy loads.

2022-07-04

13

2022-07

Ball spline manufacturer: What are the characteristics of linear guide rails?

Ball spline manufacturers believe that when linear slides are used as linear guides, thanks to the rolling friction characteristic of linear slides, the coefficient of friction is reduced to just 1/50 of that in conventional linear guides. Moreover, the gap between dynamic and static friction becomes extremely small. As a result, during bed movement, there is no slippage, enabling positioning accuracy at the M-level.

2022-07-13

25

2022-07

Advantages of MOSIONX ball screws

The MOSIONX ball screw boasts numerous advantages, including high efficiency, zero backlash, reversibility, high rigidity, and high lead accuracy. Compared to conventional lead screws, the MOSIONX ball screw incorporates a ball screw mechanism between the screw and the nut. By replacing the traditional sliding friction transmission of the screw with rolling motion provided by balls, friction losses are significantly reduced, thereby helping to maintain high efficiency and precision.

2022-07-25

02

2022-08

Advantages and Common Issues of MOSIONX Ball Screws

MOSIONX screw drives offer precise transmission and are well-suited for threading applications. MOSIONX screws provide detailed gear ratios, making them easy to control and ideal for turning operations. To maintain the precision of MOSIONX screws over the long term, the feed drive system employs optical MOSIONX screws. Consequently, a separate screw drive and a lightweight screw drive are used for thread cutting and turning feed, respectively, ensuring long-term accuracy in thread cutting. Next, let’s take a closer look at the advantages of MOSIONX screws as well as some common issues associated with them.

2022-08-02

12

2022-08

Control Methods and Selection Tips for MOSIONX Ball Screws

The influence of the bias value on the pitch of the MOSIONX ball screw nut replaces the traditional double-nut preloading method and is more suitable for medium- and light-duty preloading, typically in designs where the dynamic load is below 5%. The tension-preloading method requires only a single, excessively thick preloading plate to stretch both nuts, achieving the desired preloading effect. This is a commonly used control method for fine-pitch MOSIONX ball screws.

2022-08-12

< 1...891011 >

Contact us

Contact: Zheng Shunfang18998086927(WeChat, same number)
Company phone:86 0769-83907790
Email:3413945297@qq.com
Address: Room 101, Building 7, No. 8 Liyuan Industrial Road 2, Luyu Village, Changping Town, Dongguan City

PRODUCTS
BLOG
CONTACT US

Swipe to identify the followers:

Zhongye Transmission

Scan the code to follow and inquire.

Powered by 300.CN | SEO

Business license